CLIMATE INSTRUMENT CO.,LTD

IPX78 Water Immersion Test Chamber

Group Rain Spray Test Chamber
PriceUS $5500 / piece
Min. Order 1 piece
Terms of Payment L/C, D/A, D/P, T/T, Paypal
Update Time 2018-06-04
Item specifics
Internal dimensionDiameter 606 * height 1000mm
Water pressure0 ~ 0.5MPa adopt air compressor
Sample lift devicePortable stainless steel basket
Water level displayWater pipe with scale
Power sourceThree phase, AC380V, 50/60HZ
External dimensionDiameter 820 * height 2000mm
Test duration0 ~ 99min, 99sec
ControllerDigital pressure gauge & timer
Description

IPX78 Water Immersion Test Chamber 

Product introduction:


Water immersion test chamber according to GB4208, IEC60529 relevant standards. It is used to detect the protective performance of the equipment with anti-water, and it is applicable to the product inspection and quality control of the relevant enterprise and quality inspection department.

 

     Technical Parameter:water immersion test chamber


Model

CW-IP78

Internal dimension

Diameter 606 * height 1000mm

Diameter 820 * height 1500mm

External dimension

Diameter 820 * height 2000mm

Diameter 1000 * height 2000mm

Chamber material

304, thickness 3mm

Water pressure

0 ~ 0.5MPa adopt air compressor

Test duration

0 ~ 99min, 99sec

Sample lift device

Portable stainless steel basket

Water level display

Water pipe with scale

Controller

Digital pressure gauge & timer

Power source

Three phase, AC380V, 50/60HZ

 

Design Standard:

IPX-1 Protected against falling water Equivalent to 3-5mm rainfall per minute for a duration of 10 minutes. Unit is placed in its normal operating position.

IPX-2 Protected against falling water when tilted up to 15 degrees - Same as IPX-1 but unit is tested in 4 fixed positions - tilted 15 degrees in each direction from normal operating position.

IPX-3 Protected against spraying water - Water spraying up to 60 degrees from vertical at 10 liters/min at a pressure of 80-100kN/m2 for 5 min.

IPX-4 Protected against splashing water - Same as IPX-3 but water is sprayed at all angles.

IPX-5 Protected against water jets - Water projected at all angles through a 6.3mm nozzle at a flow rate of 12.5 liters/min at a pressure of 30kN/m2 for 3 minutes from a distance of 3 meters.

IPX-6 Protected against heavy seas - Water projected at all angles through a 12.5mm nozzle at a flow rate of 100 liters/min at a pressure of 100kN/m2 for 3 minutes from a distance of 3 meters.

IPX-7 Protected against water immersion - Immersion for 30 minutes at a depth of 1 meter.

IPX-8 Protected against water submersion - The equipment is suitable for continual submersion in water under conditions which are identified by the manufacturer.


Waterproof Test Chamber News


Water immersion test chamber view:


Water Immersion Test Chamber


How to Contact Us?

Please Send your inquiry Details in the below for our quotation, Click "Send" Now!