|Group||Rain Spray Test Chamber|
|Min. Order||1 piece|
|Terms of Payment||L/C, D/A, D/P, T/T, Paypal|
|Spray nozzle||Diameter: 0.4mm, removable|
|Distance between two nozzles||50mm|
|Turntable rotation speed||1-3 cycles/min|
|Test duration||1~999,999min, adjustable|
|Water cycling system||Built-in chamber bottom for recycling|
|Power source||Single-phase, AC220V, 50/60HZ|
|Observation window||Waterproof Toughened glass|
|External chamber material||Stainless steel|
|Internal chamber material||Stainless steel 304|
Water spray test chamber is suitable for external lighting and signaling devices and automotive lighting enclosure protection, providing a wide range of environments such as fidelity analogue electronic products and their components that may be exposed to water and spray tests during transport and use. To achieve the detection of a variety of products, waterproof performance.
Technical Parameter:water spray test chamber:
Internal dimension (W*D*H)
External dimension (W*D*H)
Internal chamber material
Stainless steel 304
External chamber material
Waterproof Toughened glass
IPX3: spray ±60° from vertical line to each side, total 120°
IPX4: spray ±180° from vertical line to each side, total 360°
Diameter: 0.4mm, removable
Distance between two nozzles
Turntable rotation speed
Water flow of each nozzle
0.07 L/min +5%
Water cycling system
Built-in chamber bottom for recycling
Single-phase, AC220V, 50/60HZ
Water spray test chamber meet following standards:
IPX-1 Protected against falling water Equivalent to 3-5mm rainfall per minute for a duration of 10 minutes. Unit is placed in its normal operating position.
IPX-2 Protected against falling water when tilted up to 15 degrees - Same as IPX-1 but unit is tested in 4 fixed positions - tilted 15 degrees in each direction from normal operating position.
IPX-3 Protected against spraying water - Water spraying up to 60 degrees from vertical at 10 liters/min at a pressure of 80-100kN/m2 for 5 min.
IPX-4 Protected against splashing water - Same as IPX-3 but water is sprayed at all angles.
IPX-5 Protected against water jets - Water projected at all angles through a 6.3mm nozzle at a flow rate of 12.5 liters/min at a pressure of 30kN/m2 for 3 minutes from a distance of 3 meters.
IPX-6 Protected against heavy seas - Water projected at all angles through a 12.5mm nozzle at a flow rate of 100 liters/min at a pressure of 100kN/m2 for 3 minutes from a distance of 3 meters.
IPX-7 Protected against water immersion - Immersion for 30 minutes at a depth of 1 meter.
IPX-8 Protected against water submersion - The equipment is suitable for continual submersion in water under conditions which are identified by the manufacturer.
Water Spray Test Chamber Views:
Water spray test chamber parts
How to Contact Us?
Please Send your inquiry Details in the below for our quotation, Click "Send" Now!